EV2=NO_CHANGE, GP_CLEARED=NO_CHANGE, EV1=NO_CHANGE, WAKEUP=NOINTERRUPTWAKEUP, EV0=NO_CHANGE
Event Monitor/Recorder Status register. Contains status flags for event channels and other Event Monitor/Recorder conditions.
| EV0 | Channel0 event flag (WAKEUP0 pin). Set at the end of any second if there has been an event during the preceding second. This bit is cleared by writing a 1 to it. Writing 0 has no effect. 0 (NO_CHANGE): No event change on channel 0. 1 (EVENT): At least one event has occurred on channel 0. |
| EV1 | Channel1 Event flag (WAKEUP1 pin). Set at the end of any second if there has been an event during the preceding second. This bit is cleared by writing a 1 to it. Writing 0 has no effect. 0 (NO_CHANGE): No event change on channel 1. 1 (EVENT): At least one event has occurred on channel 1. |
| EV2 | Channel2 Event flag (WAKEUP2 pin). Set at the end of any second if there has been an event during the preceding second. This bit is cleared by writing a 1 to it. Writing 0 has no effect. 0 (NO_CHANGE): No event change on channel 2. 1 (EVENT): At least one event has occurred on channel 2. |
| GP_CLEARED | General purpose register asynchronous clear flag. This bit is cleared by writing a 1 to it. Writing 0 has no effect. 0 (NO_CHANGE): General purpose registers have not been asynchronous cleared. 1 (EVENT): General purpose registers have been asynchronous cleared. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| WAKEUP | Interrupt/wake-up request flag (Read-only). This bit is cleared by writing a 1 to it. Writing 0 has no effect. 0 (NOINTERRUPTWAKEUP): No interrupt/wake-up request is pending 1 (INTERRUPTWAKEUP): An interrupt/wake-up request is pending. |